DAD-561 Specification
분류	항목	사양	단위
Workpiece size		ø152.4	(mm)
X-axis	Useable stroke	220	(mm)
	Cut speed	0.04~300.00	(mm/s)
	Bearing type	Air guide
Y-axis	Useable stroke	160	(mm)
	Indexing step range	0.0001 to 160.0000	(mm)
	Position accuracy (cumulative pitch)	less than 0.002/160	(mm)
	Position accuracy (single pitch)	less than 0.001/5	(mm)
	Bearing type	Linear guide
Z-axis	Maximum cutting stroke	33	(mm)
	Minimum step	0.0005	(mm)
	Repeating accuracy	0.001/5	(mm)
	Maximum blade size	76.2	(mm)
Θ-axis	Rotation Range	0 to 130	(deg)
Spindle	Output	1.5	(kW)
	Maximum revolution	30,000	(min-1[rpm])
Applicable Tape Frame		MAX 2-6-1
Utilities	Power supply	3Phase 200V
		50-60Hz
	Power consumption
	When processing	0.59	(kW)
	During warm-up	0.51	(kW)
	Maximum power	3	(kVA)
	Air pressure	0.5~0.8[5.0~8.0]	(MPa[kgf/cm2])
	Air flow rate	250	(L/min(ANR))
	Water pressure	0.2~0.4[2~4]	(MPa[kgf/cm2])
	Water flow rate
	Cutting water	5.0 maximum	(L/min)
	Cooling water	more than 2.5	(L/min)
	Duct required suction	2.5~5	(m3/min)
Machine size		796W x 850D x 1,615H	(mm)
	(including monitor)	31.3W x 33.5D x 63.6H	(inch)
Machine weight		570	(kg)